QSC PLX3602

PLX2 Series

SPECIFICATIONS PLX3602

STEREO MODE, both channels driven

BRIDGE MONO MODE

8 ohms
20 Hz-20 kHz 0.1% THD: 2500 W
EIA 1 kHz 0.1% THD: 2600 W
4 ohms
1 kHz 1% THD: 3600 W
Signal to Noise (20 Hz - 20 kHz): -107 dB
Input Sensitivity @ 8 ohms: 1.25 Vrms
Gain @ 8 ohms: 36 dB
Output Circuitry: 2-Tier Class H
Distortion (SMPTE-IM): Less than 0.02%
Typical Distortion:
1/8 rated power, 20 Hz-20 kHz Less than 0.02%
Full rated power, 20 Hz-20 kHz Less than 0.02%
Frequency Response: 20 Hz-20 kHz, -0.5 dB
Damping Factor: Greater than 500
Input Impedance:
20k ohms balanced
10k ohms unbalanced
Input Clipping: 11 Vrms (+21 dBu)
Cooling: Variable-speed fan, rear-to-front air flow
Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced
Output Connectors, each channel Neutrik NL4 Speakon and Touch-proof binding posts
(Both channels available on Ch 1 NL4 connector)
Rear Panel Switches:
Input Configuration: Bridge/Stereo/Parallel
Clip Limiters each channel
Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic)
Front Panel: Controls Detented Gain Attenuator: 0 to ? dB Power On/Off
Front Panel Indicators:
Clip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED
Parallel: Amber LED
Bridge Mono: Amber LED

PROTECTION

Amplifier Protection: Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads
Load Protection: On/off muting, DC-fault power supply shutdown
Infrasonic: -3 dB, 5 Hz
DC fault: Power supply shutdown
Ultrasonic: -3 dB, 85 kHz
Short Circuit: Cutback
Thermal: Muting at 90° C
Over Current: Active clip limiting Power supply cutback
High Line: Standard +15%, survive +25%
Low Line: -33%
Dimensions:
Height 3.5" (8.9 cm) 2 rack spaces
Width 19" (48.3 cm)
Depth 12.8" (32.6 cm)
Overall Depth 14.875" (37.9 cm)
Weight: 21 lbs. (9.5 kg) net