Slutsteg
Click here

QSC PLX1602

SPECIFICATIONSPLX1202 PLX1602 PLX2402 PLX3002 PLX3402
  STEREO MODE, Both Channels Driven
8 ohms (20 Hz-20 kHz 0.03% THD) 200 W 300 W 425 W 550 W 700 W
4 ohms (20 Hz-20 kHz 0.05% THD) 325 W 500 W 700 W 900 W 1100 W
2 ohms (1 kHz 1% THD) 600 W 800 W 1200 W 1500 W 1700 W
  BRIDGE MONO MODE
16 ohms (20 Hz-20 kHz 0.1% THD) 400 W 600 W 850 W 1100 W 1400 W
8 ohms (20 Hz-20 kHz 0.1% THD) 700 W 1100 W 1500 W 2000 W 2200 W
4 ohms (1 kHz 1% THD) 1200 W 1600 W 2400 W 3000 W 3400 W
Signal to Noise (20 Hz-20 kHz) < -106 dB < -107 dB < -108 dB < -107 dB < -107 dB
Input Sensitivity @ 8 ohms 1.0 Vrms 1.2 Vrms 1.5 Vrms 1.7 Vrms 1.9 Vrms
Input Sensitivity @ 4 ohms 0.9 Vrms 1.1 Vrms 1.3 Vrms 1.5 Vrms 1.7 Vrms
Voltage Gain 40x (32 dB) 40x (32 dB) 40x (32 dB) 40x (32 dB) 40x (32 dB)
Output Circuitry AB AB 2-Step Class H 2-Step Class H 2-Step Class H
Power Requirements
(1/8 Power Pink Noise @ 4 Ohm)		 6A 10A 8A 10A 12A
  ALL MODELS
Distortion (SMPTE-IM)
Less than 0.01%
Distortion (Typical)
  20 Hz-20 kHz: 10 dB below rated power
  1.0 kHz and below: full rated power

Less than 0.01% THD
Less than 0.01% THD
Frequency Response
20 Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB
Damping Factor
Greater than 500
Input Impedance
6k ohms unbalanced, 12 k ohms balanced
Input Clipping
10 Vrms (+22 dB)
Cooling
Variable-speed fan, rear-to-front air flow
Connectors, each channel
Input: 3-pin XLR & 1/4" TRS balanced
Output: Neutrik® Speakon® and touch-proof binding posts
Amplifier Protection
Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads
Load Protection
On/off muting, DC-fault power supply shutdown
Dimensions
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces)
13.25" (33.7 cm) deep (from front mounting rails)
Gain
40x (32 dB)
Weight
21 lbs (9.5 kg) net