QSC PL230

PowerLight 2 Series

SPECIFICATIONS PL230

STEREO MODE, Both Channels Driven

• 8 ohms FTC 20 Hz-20 kHz 0.03% THD: 575 W
• 8 ohms EIA 1 kHz 1% THD: 625 W
• 4 ohms FTC 20 Hz-20 kHz 0.05% THD: 900 W
• 4 ohms EIA 1 kHz 1% THD: 1050 W
• 2 ohms EIA 1 kHz 1% THD: 1050 W

BRIDGE MONO MODE

• 16 ohms FTC 20 Hz-20 kHz 0.1% THD: 1200 W
• 8 ohms FTC 20 Hz-20 kHz 0.1% THD: 2000 W
• 4 ohms EIA 1 kHz 1% THD: 3000 W
• Noise (20 Hz-20 kHz): -107 dB
• Input Sensitivity @ 8 ohms: 1.17 Vrms
• Input Sensitivity @ 4 ohms: 1.07 Vrms
• Voltage Gain: 35 dB
• Output Circuitry: 2-Tier Class H
• Power Requirements: 9A*

ALL MODELS 

• Distortion (SMPTE-IM): Less than 0.01%
• Distortion (typical)
  10 dB below rated power:20 Hz-20 kHz: Less than 0.015% THD
  Full rated power:5.0 kHz and below: Less than 0.01% THD
• Frequency Response: 20 Hz-20 kHz, ± 0.2 dB; 8 Hz-100 kHz, +0, -3 dB
• Damping Factor: Greater than 500
• Input Impedance: 6k ohms unbalanced, 12k ohms balanced
• Cooling: Variable-speed fan, rear-to-front air flow
• Connectors (each channel): Input 1/4" TRS, 3-pin XLR and 3-pin detachable terminal blocks (1 each per channel)
  Output: Neutrik Speakon® and touch-proof binding post
• Controls Front: AC switch, Ch.1 and Ch.2 gain knobs
  Rear: DIP switch for Ch.1 and Ch.2; clip limiter on/off, LF filter on/off, LF filter, freq select-30 or 50 Hz; inputs parallel or stereo; bridge mode
• Indicators:
  PARALLEL INPUTS: Orange LED
  BRIDGED: Yellow LED
  PWR-ON: Green LED
  CLIP/PROT: Red LED(1 per channel)
  LEVEL -10 dB: Amber LED(1 channel)
  LEVEL -20 dB: Green LED(1 per channel)
  SIGNAL -35 dB: Green LED(1 per channel)
• Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, & RF protection. Stable into reactive or mismatched loads.
• Load Protection: On/off muting, DC-fault power supply shutdown
• Dimensions 19" (48.3cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces),
  14" (35.6 cm) deep (from front mounting rails) 
• Weight 21 lbs (9.5 kg) net,